QB062/QB078 Humidifier Module

1.Product Introduction

The humidifier module includes a driving plate and a microporous atomizing plate, which is composed of piezoelectric ceramic ring and metal steel sheet. Through the driving circuit board output PWM pulse width modulation, the piezoelectric ceramic produces hundreds of thousands of high-frequency resonances per second, driving the metal sheet vibration. Water is ejected from thousands of micropores in steel sheets to form 4-6 microns of water molecules, which scatter the structure of liquid water molecules and produce water mist.

2.Parameter Specification

3.Wiring Diagram

4.Sample Code

 1int humidifierPin=7;
 2void setup(){
 3  pinMode(humidifierPin,OUTPUT);
 4}
 5void loop(){
 6  digitalWrite(humidifierPin,HIGH);//Turn on the humidifier
 7  delay(5000);//Delay 5 seconds
 8  digitalWrite(humidifierPin,LOW);// Turn off the humidifier
 9  delay(5000);//Delay 5 seconds
10}

5.Test Result

After uploading the code to the controller board, prepare a container with water, and then place the micro-pore atomizer of the humidifier module face up on the water inside the container. The humidifier will start and spray water mist every five seconds, and then pause for five seconds, and cycle all the time.

6.Related Resources

PDF and Code

7.Get One Now

B2B Business: info@acebott.com