1.Product Introduction
The LED module is a component that integrates LED lamp beads, drive circuits, and housing. Used to provide lighting, indication, or display functions. According to the specific application requirements, the LED module can be a wide variety of shapes, sizes and colors, while its color depends on the material and the light emitting principle.
Application reference: warning lights, floodlights, etc.
2.Parameter Specification
| Parameter | Value//Description |
|---|---|
| Operating voltage | 3.3V~5V |
| Operating temperature | -25°C~+85°C |
| Color of light | Blue |
| Control signal | Digital signal /PWM signal |
| Lamp bead diameter | 5MM |
| Size | 3.16cm*2.38cm |
3.Wiring Diagram
| LED Motion Sensor | UNO |
|---|---|
| VCC | 5V |
| GND | GND |
| S | Digital Pin 11 |
4.Sample Code
1//www.acebott.com
2void setup(){
3 pinMode(11, OUTPUT); // Set pin 11 as an output pin
4}
5void loop(){
6 digitalWrite(11, HIGH); // Turn on the LED connected to pin 11
7 delay(1000); // Wait for 1 second
8 digitalWrite(11, LOW); // Turn off the LED connected to pin 11
9 delay(1000); // Wait for 1 second
10}
5.Test Result
When you have successfully connected the line according to the wiring diagram and successfully uploaded the correct program, your light will come on and blink.
6.Related Resources
7.Get One Now
B2B Business: info@acebott.com
